Filter
Top Products
4-118
Garmin G600 Pilot’s Guide
190-00601-02 Rev. E
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
Data Link Lightning Data Viewing Range
The Lightning Data Viewing Range option allows you to select the map range where
at and below that value Lightning weather products will be shown on the selected MFD
Wx Data Link Map page (1, 2, or 3). When Off is selected, Lightning will not be shown.
In the figure above where 300 NM is selected, GFDS data will be shown at map
ranges of 300 NM and lower.
1) While viewing a WX Data Link Map page of the WX page group, press the
MENU key to display the Page
Menu Options
. Turn the large MFD knob to
highlight the Weather Setup option and press ENT
.
2) Turn the large MFD knob to highlight DL LTNG Data Viewing Range.
3) Turn the small MFD knob to highlight the desired value. Press ENT
to accept
the displayed value. The next option will be highlighted.
Figure 4-112 GFDS Lightning Viewing Range Selection
4) Press the small MFD knob to cancel selection or to end editing and return to
the WX page or turn the large MFD knob to the next option.