Filter
Top Products
4-46
Garmin G600 Pilot’s Guide
190-00601-02 Rev. E
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
Switching Between TIS Operating Modes
1) Turn the large MFD knob to the MAP page group and then turn the small MFD
knob to the Traffic Map Page.
2) Select the
STANDBY
or
OPERATE
soft key to switch between modes. The mode
is displayed in the upper left corner of the Traffic Map Page.
OR
1) Press the
MENU
key.
2) Select Operate mode or Standby mode whether airborne or on the ground.
3) Press the ENT key.
NOTE: An alert will be generated when Standby is selected and the
aircraft is in the air.
The annunciations indicate the status of traffic information appear in a banner
at the lower left corner of maps on which traffic can be displayed.