Filter
Top Products
3-44
Garmin G600 Pilot’s Guide
190-00601-02 Rev. E
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
Restricted Airspace Viewing Range
The Restricted airspace viewing range option selects whether the map range
is shown on the Navigation Map. Restricted airspace information will be shown
at and below the selected map range. When Off is selected, the information
will not be shown. In the example below where 200 NM is selected, Restricted
airspace information will be shown at map ranges of 200 NM and lower.
Figure 3-59 Navigation Map Restricted Airspace Viewing Range Selection
1) While viewing the Navigation Map Setup page and the Aviation Group active,
turn the large MFD knob to highlight the “
Restricted
Viewing Range” option.
2) Turn the small MFD knob to change the highlighted value.
3) Press ENT
to accept the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.