Filter
Top Products
3-34
Garmin G600 Pilot’s Guide
190-00601-02 Rev. E
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
Lightning Viewing Range
The Lightning Viewing Range option selects whether the Lightning weather
products is shown on the Navigation Map. Lightning weather products will be
shown at and below the selected map range. When Off is selected, Lightning
weather will not be shown. In the figure below where 200 NM is selected,
Lightning symbols will be shown at map ranges of 200 NM and lower.
Figure 3-48 Lightning Viewing Range Selection
1) While viewing the Navigation Map Setup page and the Weather Group active,
turn the large MFD knob to highlight the “Lightning Viewing Range” option.
2) Turn the small MFD knob to change the highlighted value.
3) Press ENT
to accept the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.