Filter
Top Products
3-57190-00601-02 Rev. E
Garmin G600 Pilot’s Guide
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary Appendix A
Appendix B
Index
Figure 3-74 Date and Time Values
4) A Time Offset may be entered by using the large and small MFD knobs to
change the values. Press ENT
after completing any changes.
5) Press the small MFD knob to exit adjustments.
3.4.1.6 MFD Display Units
The MFD Display Units options allow you to select the units of measurement
conventions displayed on the MFD. Distance and Speed selections are Imperial,
Metric, or Nautical. Altitude and Vertical speed selections are Feet or Meters.
1) While viewing the System Setup page of the AUX page group, press the small
MFD knob to activate the cursor. Turn the large MFD knob to highlight the
Distance and Speed (DIS, SPD) units of measurement.
Figure 3-75 Distance and Speed MFD Display Units
2) Turn the small MFD knob to select Imperial, Metric, or Nautical and then press
ENT. The Altitude and Vertical Speed units selection will now be highlighted.
3) Turn the small MFD knob to select Feet or Meters and then press ENT.