Filter
Top Products
3-79190-00601-02 Rev. E
Garmin G600 Pilot’s Guide
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary Appendix A
Appendix B
Index
4) Turn the small MFD knob to select the desired data item and press ENT.
5) Press the small MFD knob to remove the cursor.
To restore factory default settings for data fields on the Active Flight Plan
Page:
1) While viewing the Active Flight Plan Page of the FPL page group, press MENU
to display the Active Flight Plan Page Options window.
2) Turn the large MFD knob to highlight “Restore Defaults?” and then press
ENT.
Figure 3-111 Active Flight Plan Page Menu Option Selection to Restore Defaults
3.5.1.3 Setting the Altitude Minimums Alerter
The Altitude Alerting function provides the pilot with visual and aural
alerts (if interfaced to an audio panel) when approaching the Selected Altitude.
Whenever the Selected Altitude is changed, the Altitude Alerter is reset. The
Altitude Alerter is independent of any autopilot installed in the aircraft. See the
Altitude Alerting section of the PFD section for more details.
1) While viewing the Charts Page of the FPL page group, press the Menu key.
With the Set Minimums item highlighted, press ENT.
2) With the Minimums Source highlighted, select the Altitude Minimums Alerter
source with small MFD knob.
Figure 3-112 Minimums Source Selection
3) Turn the large MFD knob to highlight the Altitude Minimums value. Turn the
large and small MFD knobs to change the Altitude Minimums value.
Figure 3-113 Minimums Altitude Selection