Garmin G600 Marine GPS System User Manual


 
3-47190-00601-02 Rev. E
Garmin G600 Pilot’s Guide
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary Appendix A
Appendix B
Index
TFR Viewing Range (optional)
The Temporary Flight Restriction (TFR) viewing range option selects whether
TFR information is shown on the Navigation Map. TFR information will be shown
at and below the selected map range. When Off is selected, the information will
not be shown. In the example below where 500 NM is selected, TFR information
will be shown at map ranges of 500 NM and lower. This optional feature requires
an active data link receiver.
Figure 3-62 Navigation Map TFR Viewing Range Selection
1) While viewing the Navigation Map Setup page and the Aviation Group is active,
turn the large MFD knob to highlight the “TFR” option.
2) Turn the small MFD knob to change the highlighted value.
3) Press ENT
to accept the displayed value.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to another option.