Filter
Top Products
4-65190-00601-02 Rev. E
Garmin G600 Pilot’s Guide
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary Appendix A
Appendix B
Index
Cell Movement Data Viewing Range
The Cell Movement Data Viewing Range option allows you to select the map
range and below where Cell Movement weather products will appear on the
selected MFD Wx Data Link Map page (1, 2, or 3). When Off is selected, Cell
Movement will not be shown. In the figure below where 300 NM is selected,
Cell Movement data will be shown at map ranges of 300 NM and lower.
Figure 4-47 Cell Movement Viewing Range Selection
1) While viewing a WX Data Link Map page of the WX page group, press the
MENU key to display the Page
Menu Options
. The cursor flashes on the
“Weather Setup” option. Press ENT
.
2) Turn the large MFD knob to highlight the Cell Movement Data Viewing Range
value.
3) Turn the small MFD knob to highlight the desired value. Press ENT
to accept
the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.