Filter
Top Products
4-79190-00601-02 Rev. E
Garmin G600 Pilot’s Guide
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary Appendix A
Appendix B
Index
County Data Viewing Range
The County Data Viewing Range option allows you to select the map range
where at and below that value County weather products will be shown on the
selected MFD Wx Data Link Map pages (1, 2, or 3). When Off is selected, County
Data will not be shown. In the figure below where 100 NM is selected, County
data will be shown at map ranges of 100 NM and lower.
Figure 4-66 County Data Viewing Range Selection
1) While viewing a WX Data Link Map page of the WX page group, press the
MENU key to display the Page
Menu Options
. The cursor flashes on the
“Weather Setup” option. Press
ENT
.
2) Turn the large MFD knob to highlight the County Data Viewing Range value.
3) Turn the small MFD knob to highlight the desired value. Press ENT
to accept
the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.