Filter
Top Products
4-126
Garmin G600 Pilot’s Guide
190-00601-02 Rev. E
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
Winds Aloft Altitude
The Winds Aloft Altitude option allows you to select the altitude where
Winds Aloft weather products will be shown on the selected MFD Wx Data Link
Map page (1, 2, or 3). Altitude can be selected in 3000 foot increments from the
surface up to 42,000 feet MSL.
Pressing the WIND DOWN or WIND UP soft keys steps down or up in the
3,000 foot increments. In the figure below where 6000 feet is selected, Winds
Aloft data will be shown for winds reported at an altitude of 6000 feet.
Figure 4-121 Winds Aloft Altitude Selection
1) While viewing a WX Data Link Map page of the WX page group, press the
MENU key to display the Page
Menu Options
. Turn the large MFD knob to
highlight the Weather Setup option and press ENT
.
2) Turn the large MFD knob to highlight Winds Aloft Altitude Viewing Range.
3) Turn the small MFD knob to highlight the desired value. Press ENT
to accept
the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the WX page or turn the large MFD knob to the next option.