Filter
Top Products
3-40
Garmin G600 Pilot’s Guide
190-00601-02 Rev. E
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
VOR Viewing Range
The VOR viewing range option selects whether VOR information is shown on
the Navigation Map. VOR information will be shown at and below the selected
map range. When Off is selected, the information will not be shown. In the
example below where 150 NM is selected, VOR information will be shown at
map ranges of 150 NM and lower.
Figure 3-55 Navigation Map VOR Viewing Range Selection
1) While viewing the Navigation Map Setup page and the Aviation Group active,
turn the large MFD knob to highlight the “VOR Viewing Range” option.
2) Turn the small MFD knob to change the highlighted value.
3) Press ENT
to accept the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.