Filter
Top Products
5-12
Garmin G600 Pilot’s Guide
190-00601-02 Rev. E
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
Power-up Page Display Definition
System time is not available.
GPS satellite data is unknown
or the GPS navigator has not
yet locked onto satellites. Check
database cycle number for
effectivity.
System is verifying chart
database when new cycle is
installed for the first time.
After verifying, chart database is
found to be corrupt. ChartView
will not be available.
Table 5-1 Power-up Page Annunciations and Definitions
The ChartView time critical information can also be found on the AUX - System
Status page. The database CYCLE number, EXPIRES, and DISABLES dates of the
ChartView database appear in either blue or yellow text. When the ChartView
EXPIRES date is reached, ChartView becomes inoperative 70 days later. This is
shown as the DISABLES date. When the DISABLES date is reached, charts are
no longer available for viewing.
Select the DBASE soft key for scrolling through the database information.
Scroll through the database with the MFD knob or ENT key.
The ChartView database is provided directly from Jeppesen. ChartView is an
optional feature that requires enablement by a Garmin dealer. Refer to Jeppesen
Databases in Appendix A for instructions on revising the ChartView database.