Filter
Top Products
A-6
Garmin G600 Pilot’s Guide
190-00601-02 Rev. E
4) Acknowledge the Power-up Page agreement by pressing the
ENT
key or the
right-most soft key. If a database is highlighted in yellow, it is either expired or
the G600 can not determine the date.
Figure A-5 Database Information on the Splash Screen
5) Use the large MFD knob to select the AUX page group and then the small
MFD knob to reach the System Status Page.
6) Press the DBASE soft key to place the cursor in the “DATABASE” window.
7) Turn the small MFD knob to scroll through the list and check that all databases
are current and there are no errors.
8) Power down the GDU 620.