Filter
Top Products
3-43190-00601-02 Rev. E
Garmin G600 Pilot’s Guide
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary Appendix A
Appendix B
Index
Class D Airspace Viewing Range
The Class D airspace viewing range option selects whether Class D airspace
information is shown on the Navigation Map. Class D airspace information
will be shown at and below the selected map range. When Off is selected, the
information will not be shown. In the example below where 150 NM is selected,
Class D airspace information will be shown at map ranges of 150 NM and
lower.
Figure 3-58 Navigation Map Class D Viewing Range Selection
1) While viewing the Navigation Map Setup page and the Aviation Group active,
turn the large MFD knob to highlight the “
Class D
Viewing Range” option.
2) Turn the small MFD knob to change the highlighted value.
3) Press ENT
to accept the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.