Filter
Top Products
3-37190-00601-02 Rev. E
Garmin G600 Pilot’s Guide
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary Appendix A
Appendix B
Index
SafeTaxi™ Viewing Range
The SafeTaxi™ viewing range option selects whether SafeTaxi information is
shown on the Navigation Map. SafeTaxi will be shown at and below the selected
map range. When Off is selected, SafeTaxi information will not be shown. In the
example below where 3 NM is selected, the SafeTaxi information will be shown
at map ranges of 3 NM and lower.
Figure 3-52 Navigation Map Safe Taxi Viewing Range Selection
1) While viewing the Navigation Map Setup page and the Aviation Group active,
turn the large MFD knob to highlight the “SafeTaxi Range” option.
2) Turn the small MFD knob to change the highlighted value.
3) Press ENT
to accept the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.