Filter
Top Products
A-3190-00601-02 Rev. E
Garmin G600 Pilot’s Guide
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary Appendix A
Appendix B
Index
4) A notice on the display will indicate successful updating of the database.
Figure A-2 Database Loading Completed
5) The following display will show the databases and their current status.
Figure A-3 Database Information on the Splash Screen
6) Use the large MFD knob to select the AUX page group and then small MFD
knob to reach the System Status Page.
7) Press the DBASE soft key to place the cursor in the “DATABASE” window.
8) Turn the small MFD knob to scroll through the list and check that all databases
are current and there are no errors. If a database is highlighted in yellow, it is
either expired or the G600 can not determine the date.
9) Power down the GDU 620.