Filter
Top Products
e-STUDIO3511/4511
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 104 November 2003 © TOSHIBA TEC
Feeding retry
number setting
(LCF)
Paper size (305x457 mm)
feeding/widthwise direction
Paper size (Post card)
feeding/widthwise direction
Judged number of polygonal
motor rotation error (Normal
rotation)
Judged number of polygonal
motor rotation error (At
acceleration/deceleration)
Default setting of paper
source
Automatic change of paper
source
Feeding retry setting
Pre-running rotation of
polygonal motor
ALL
ALL
ALL
ALL
ALL
ALL
PPC
PPC
ALL
ALL
5
<0-5>
5
<0-5>
457/305
<148-457/
105-305>
148/100
<148-432/
100-297>
0
<0-1>
0
<0-1>
0
<0-5>
1
<0-2>
0
<0-1>
0
<0-2>
M
M
M
M
M
M
SYS
SYS
M
SYS
Sets the number of times of the
feeding retry from the LCF.
* Post card is supported only for JPN
model.
Displays the error [CA10] when the
set number of rotation error has been
detected.
0: 2 times 1: 12 times
0: Waiting time for polygonal motor
rotation overshooting 0.6 sec.
1: Waiting time for polygonal motor
rotation overshooting 2.2 sec.
0: A4/LT 1: LCF
2: Upper drawer 3: Lower drawer
4: PFP upper drawer
5: PFP lower drawer
Sets whether or not changing the
drawer automatically to the other
drawer with the paper of the same
size when paper in the selected
drawer has run out.
0: OFF
1: ON (Changes to the drawer with
the same paper direction and size:
ex. A4 to A4)
2: ON (Changes to the drawer with
the same paper size. Paper with
the different direction is acceptable
as long as the size is the same:
ex., A4 to A4-R, LT-R to LT. “1” is
applied when the staple/hole-
punch is specified.)
0: ON 1: OFF
Sets whether or not switching the
polygonal motor from the standby
rotation to the normal rotation when
the original is set on the RADF or the
platen cover is opened.
0: Valid (when using RADF and the
original is set manually)
1: Invalid
2: Valid (when using RADF only)
Paper
feeding
Paper
feeding
Paper
feeding
Laser
Laser
Paper
feeding
Paper
feeding
Paper
feeding
Laser
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Acceptable
value>
RAM Contents
Proce-
dure
468-0
468-1
470
471
478
479
480
481
482
483
4
4
10
10
1
1
1
1
1
1
Plain
paper
Others
05/05