Filter
Top Products
e-STUDIO3511/4511
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 16 November 2003 © TOSHIBA TEC
E-mail MIME error
E-mail analysis error
Partial mail time-out error
Partial mail related error
Insufficient HDD capacity error
Warning of insufficient HDD capacity
Warning of partial mail interruption
Partial mail reception setting OFF
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
3A10
3A11
3A12
3A20
3A21
3A22
3A30
3A40
3A50
3A51
3A52
3A60
3A61
3A62
3A70
3A80
3A81
3A82
MIME Error has been detected in the
received mail.
MIME Error has been detected in the
received mail. This mail has been
transferred to the administrator.
MIME Error has been detected in the
received mail. This mail could not be
transferred to the administrator.
Analyze Error has been detected in the
received mail.
Analyze Error has been detected in the
received mail. This mail has been
transferred to the administrator.
Analyze Error has been detected in the
received mail. This mail could not be
transferred to the administrator.
Whole partial mails were not reached by
timeout.
Partial Mail Error has been detected in
the received mail.
HDD Full Error has been occurred in this
mail.
HDD Full Error has been occurred in this
mail. This mail has been transferred to
the administrator.
HDD Full Error has been occurred in this
mail. This mail could not be transferred
to the administrator.
HDD Full Warning has been occurred in
this mail.
HDD Full Warning has been occurred in
this mail. This mail could not be transferred
to the administrator.
HDD Full Warning has been occurred in
this mail. This mail could not be
transferred to the administrator.
Receiving partial mail was aborted since
the partial mail setting has been changed
to Disable.
Partial mail was received during the
partial mail setting is disabled.
Partial mail was received during the partial
mail setting is disabled. This mail has been
transferred to the administrator.
Partial mail was received during the partial
mail setting is disabled. This mail could not
be transferred to the administrator.
Trouble-
shooting
Error code Contents
Message displayed in the TopAccess
screen
(6) E-mail reception related error