Filter
Top Products
November 2003 © TOSHIBA TEC 2 - 105 e-STUDIO3511/4511
ERROR CODE AND SELF-DIAGNOSTIC MODE
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
(color)
PPC
(black)
PPC
(black)
ALL
ALL
(black)
ALL
(color)
ALL
0
<0-1>
0
<0-1>
0
<0-2>
0
<0-1>
3
<2-3>
5
<0-5>
0
<0-1>
0
<0-1>
0
<0-1>
0
<0-1>
1
<0-1>
16
<0-16>
0
<0-16>
1
<0-1>
Sets whether or not switching the
polygonal motor from the normal
rotation to the standby rotation at the
Auto Clear Mode.
0: Valid 1: Invalid
Sets the rotational status of
polygonal motor on standby.
0: Rotated (The rotational speed is
set at 08-490.)
1: Stopped
Switches the polygonal motor to the
standby rotation when a certain
period of time has passed from the
pre-running. At this code, the period
to switch the status to the standby
rotation is set.
0: 15 sec. 1: 30 sec. 2: 45 sec.
* This setting is effective when “0” or
“2” is set at 08-483.
0: Performs only at no paper size is
designated
1: Performs regardless of designa-
tion of paper size
Set the type of polygonal motor.
2: 2 clock type 3: 3 clock type
0: 38090.55rpm 1: 35000rpm
2: 30000rpm 3: 25000rpm
4: 20000rpm 5: 10000rpm
0: Stopped 1: 10000rpm
Sets the speed for color printing.
0: 11 pages/minute
1: 6 pages/minute
Sets the image reproduction method
at photo mode.
0: Error diffusion 1: Dither
0: Automatic
1: Manual (Center)
0: Invalid
1: Valid
0: Invalid 1: 0 sec. 2: 2 sec.
3: 3 sec. 4: 4 sec. 5: 5 sec.
6: 6 sec. 7: 7 sec. 8: 8 sec.
9: 10 sec. 10: 12 sec. 11: 14 sec.
12: 16 sec. 13: 18 sec. 14: 20 sec.
15: 25 sec. 16: 30 sec.
Sets whether or not correcting the 1st
transfer roller bias depending on the
environment.
0: Invalid 1: Valid
1
1
1
1
1
1
1
1
1
1
1
4
4
1
SYS
SYS
SYS
M
M
M
M
M
SYS
SYS
M
M
M
M
484
485
486
487
488
489
490
497
502
503
511
526-0
526-1
541
Laser
Laser
Laser
Transfer
Laser
Laser
Laser
General
Image
User
interface
Main
charger
Fuser
Image
control
Polygonal motor rotational
status switching at the Auto
Clear Mode
Rotational status of
polygonal motor on standby
Timing of auto-clearing of
polygonal motor pre-running
rotation
Selection of performing the
2nd transfer roller cleaning
(Bypass feed)
Setting of polygonal motor
type
Polygonal motor rotation
number on standby
Polygonal motor rotation in
the energy saving mode
Speed switching for color
printing
Error diffusion and dither
setting at photo mode
Default setting of density
adjustment
Main charger wire auto-
cleaning setting
Pre-running time for first
printing
(OHP film)
Environment correction
control of 1st transfer roller
bias
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Acceptable
value>
RAM Contents
Proce-
dure
04/10