Filter
Top Products
e-STUDIO3511/4511
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 24 November 2003 © TOSHIBA TEC
[FAX] button: OFF/[COPY] button: OFF ( [FAX] LED: OFF/[COPY] LED: OFF)
Digital
Button
Items to check
Condition
key with highlighted button
A Bypass unit connection Not connected
B ADU connection Not connected
C—
[1]
D LCF connection Not connected
E—
F—
G—
H LCF drawer detection switch Drawer not installed
A PFP upper drawer detection switch Drawer not installed
B—
C PFP upper drawer paper stock sensor Paper almost empty
[2]
D PFP upper drawer feed sensor Paper present
E PFP connection Not connected
F PFP side cover open/close switch Cover opened
G PFP upper drawer empty sensor No paper
H PFP upper drawer tray-up sensor Tray at upper limit position
A LCF tray bottom sensor Tray at bottom position
B LCF standby side paper misload detection sensor Properly loaded
C—
[3]
D—
E—
F—
G—
H Paper stock sensor at LCF feed side Paper present
A PFP lower drawer detection switch Drawer not installed
B—
C PFP lower drawer paper stock sensor Paper almost empty
[4]
D PFP lower drawer feed sensor Paper present
E PFP motor rotation status (Motor is rotating at output mode (03)) Abnormal rotation
F—
G PFP lower drawer empty sensor No paper
H PFP lower drawer tray-up sensor Tray at upper limit position
A LCF end fence home position sensor Fence home position
B LCF end fence stop position sensor Fence stop position
C Empty sensor at LCF standby side No paper
[5]
D LCF side cover open/close switch Cover closed
E LCF motor rotation status (Motor is rotating at output mode (03)) Abnormal rotation
F LCF tray-up sensor Tray at upper limit position
G LCF feed sensor No paper
H Empty sensor at LCF feed side No paper
A Lower drawer detection switch Drawer not installed
B Upper drawer detection switch Drawer not installed
C Lower drawer paper stock sensor Paper almost empty
[6]
D Upper drawer paper stock sensor Paper almost empty
E Lower drawer empty sensor No paper
F Upper drawer empty sensor No paper
G Lower drawer tray-up sensor Tray at upper limit position
H Upper drawer tray-up sensor Tray at upper limit position