Filter
Top Products
e-STUDIO3511/4511
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 8 November 2003 © TOSHIBA TEC
CB20
CB30
CB40
CB50
CB60
CB80
CB90
CBA0
CBB0
CBC0
CBD0
CBE0
CBF0
CC00
CC10
CC20
CC30
CC40
Delivery motor abnormality: Delivery motor or delivery roller is
not rotating normally. [MJ-1022]
Tray 1/Tray 2 shift motor abnormality: Tray 1/Tray 2 shift motor
is not rotating or delivery tray is not moving normally.
[MJ-1023/1024]
Rear aligning plate motor abnormality: Rear aligning plate
motor is not rotating or aligning plate is not moving normally.
[MJ-1023/1024]
Staple motor abnormality: Staple motor is not rotating or stapler
is not moving normally. [MJ-1022/1023/1024]
Stapler shift motor abnormality: Stapler shift motor is not
rotating or staple unit is not moving normally. [MJ-1023/1024]
Backup RAM data abnormality:
(1) Abnormality of checksum value on finisher controller PC board
is detected when the power is turned ON. [MJ-1023/1024]
(2) Abnormality of checksum value on punch controller PC
board is detected when the power is turned ON.
[MJ-1023/1024 (when MJ-6004 is installed)]
Paper pushing plate motor abnormality: Paper pushing plate
motor is not rotating or paper pushing plate is not moving
normally. [MJ-1024]
Stitch motor (front) abnormality: Stitch motor (front) is not rotating
or rotary cam is not moving normally. [MJ-1024]
Stitch motor (rear) abnormality: Stitch motor (rear) is not rotating
or rotary cam is not moving normally. [MJ-1024]
Alignment motor abnormality: Alignment motor is not rotating or
aligning plate is not moving normally. [MJ-1024]
Guide motor abnormality: Guide motor is not rotating or guide is
not moving normally. [MJ-1024]
Paper folding motor abnormality: Paper folding motor or paper
folding roller is not rotating normally. [MJ-1024]
Paper positioning plate motor abnormality: Paper positioning
plate motor is not rotating or paper positioning plate is not
moving normally. [MJ-1024]
Sensor connector abnormality: Connector of guide home position
sensor, paper pushing plate home position sensor or paper push-
ing plate top position sensor is disconnected. [MJ-1024]
Micro switch abnormality: With all covers closed, inlet door switch,
delivery door switch or front cover switch is open. [MJ-1024]
Communication error between finisher and saddle stitcher:
Communication error between finisher controller PC board and
saddle stitcher controller board [MJ-1023/1024]
Stack processing motor abnormality: The stack processing
motor is not rotating or the stack delivery belt is not moving
normally. [MJ-1022]
Swing motor abnormality: Swing motor is not rotating or swing
unit is not moving normally. [MJ-1023/1024]
Trouble-
shooting
Error code Classification Contents
Ch. 5.1.16
Ch. 5.1.16
Ch. 5.1.16
Ch. 5.1.16
Ch. 5.1.16
Ch. 5.1.16
Ch. 5.1.16
Ch. 5.1.16
Ch. 5.1.16
Ch. 5.1.16
Ch. 5.1.16
Ch. 5.1.16
Ch. 5.1.16
Ch. 5.1.16
Ch. 5.1.16
Ch. 5.1.16
Ch. 5.1.16
Ch. 5.1.16
Finisher related
service call