Filter
Top Products
e-STUDIO3511/4511
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 134 November 2003 © TOSHIBA TEC
1485
1486
1487
1488
1489
1491
1800-0
1800-1
1800-2
1801
1802-0
1802-1
1802-2
Network
Network
Network
Network
Network
Network
Image
process-
ing
Image
process-
ing
Image
process-
ing
Setting whether use of Internet
FAX is permitted or not when it
is given an authentication
Server setting for LDAP user
authentication
"From" address assignment
method when it is given an
authentication
ID setting of LDAP server for
"From" address assignment
Setting for "From" address
edit at "Scan to Email"
E-mail domain name
Color toner forced
supply time
setting
Color toner forced supply
count setting
Start up setting of
the developer
material stabiliz-
ing mode.
ALL
ALL
ALL
ALL
ALL
ALL
ALL
(color)
ALL
(color)
ALL
(color)
ALL
(color)
ALL
ALL
ALL
0
<0-1>
0
<0-
4294967295>
0
<0-2>
0
<0-
4294967295>
0
<0-1>
-
70
<0-255>
70
<0-255>
70
<0-255>
7
<1-10>
3
<2-8>
50
<0-100>
10
<0-20>
SYS
SYS
SYS
SYS
SYS
SYS
M
M
M
M
M
M
M
Y
M
C
Level
Pattern
interval
Number of
repeating
time
0: Not permitted
1: Permitted
0:
"User name" + @ + "Domain name"
1: LDAP search
2: Use the address registered in
"From" field of E-mail setting
0: Not permitted
1: Permitted
96+2 (delimiter) character
ASCII sequence only
Sets the motor driving time of the
developer unit at the time of the color
toner forced supply.
0-255: Setting value x 0.1 seconds
Sets the number of times of the color
toner forced supply.
Sets the performing level of the
developer material stabilizing
operation.
Set the interval time between
performances of developer material
stabilizing operation.
Set the number of repeating times of
the developer material stabilizing
operation.
1
2
1
2
1
11
4
4
4
1
4
4
4
(Note 1)
In this equipment, a toner image is formed on the transfer belt prior to a paper feeding.
When the feeding retry occurs and the transport timing is delayed, the toner image on the transfer belt is
cleaned off without the 2nd transfer since the paper cannot be reached for the 2nd transfer process.
After that, the toner image formation is retried while the paper is waited.
In this case, the toner for this image formation is consumed wastefully since the toner image on the
transfer belt is already cleaned off, even though the printing is normally completed.
Therefore, note that the excessive toner will be consumed consequently when the upper limit value of
feeding retry counter is set larger or set as “0” (no limit).
The toner is also consumed wastefully when the paper misfeeding occurs. Replace the roller at earlier
timing if the paper misfeedings have occurred frequently.
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Acceptable
value>
RAM Contents
Proce-
dure
05/05