Filter
Top Products
November 2003 © TOSHIBA TEC 6 - 49 e-STUDIO3511/4511 FIRMWARE UPDATING
(4) Connect the USB storage device to the USB connector (host) on the SYS board.
Cover plate
USB connector (host)
USB storage device
(a) Update procedure
Important:
• The file system of USB storage device should be formatted in FAT format. Be careful since the devices
formatted in FAT32 or NTFS format will not be operated. The file system can be confirmed on the
properties in applications such as Explorer of Windows.
• Do not turn OFF the power during the update. The data could be damaged and not to be operated
properly.
(1) Connect the USB storage device to the PC and write the data file.
• Confirm the data file name before writing ( Page 6-44).
• The file system of USB storage device should be formatted in FAT format.
• Windows 95 and NT do not support USB. Be careful since the data can not be written on the
devices in the PCs with these operating systems.
(2) Turn OFF the power of equipment.
(3) Take off the cover plate.