Filter
Top Products
e-STUDIO3511/4511
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 158 November 2003 © TOSHIBA TEC
Toner cartridge reference
Service technician reference
Full color/Twin color
Yellow
Magenta
Cyan Black Total Yellow
Magenta
Cyan Black
Black
Copy function
Printer function
FAX function
Total
: With data
: Without data
(e) Type of calculated data
Since this is multifunctional and color equipment, the data of pixel count is calculated for each
function and color.
The following list is the information that can be confirmed by LCD screen. But actually, more
information can be confirmed by the setting mode (08).
See after-mentioned (5)-(c) for details.
Table 2-201 Type of calculated data
(f) Setting related with the pixel counter function
(f-1) Standard paper size setting
The standard paper size (A4 or LT) to convert it into the pixel count is selected (08-1500).
(f-2) Pixel counter display setting
Whether or not to display the pixel counter on the LCD screen is selected (08-1504).
(f-3) Display reference setting
The reference when displaying the pixel counter on the LCD screen (toner cartridge refer-
ence or service technician reference) is selected (08-1505).
(f-4) Determination counter of toner empty
This is the counter to determine the replacement of new toner cartridge after the toner
empty is detected.
After the toner empty is detected by the auto-toner sensor, this counter checks if toner
empty is not detected one more time while the specified number of pixel count or output
pages is counted.
(f-5) Pixel counter clearing
There are 3 types for the pixel count clear as follows:
08-1501: All information related to the pixel count is cleared.
08-1502: All information related to the service technician reference pixel count is cleared.
08-1503: All information related to the toner cartridge reference pixel count is cleared.