Filter
Top Products
e-STUDIO3511/4511 REMOTE SERVICE 8 - 14 November 2003 © TOSHIBA TEC
7
8.2 Service Notification
8.2.1 Outline
This function automatically notifies the status of the equipment to the service technician by E-mail or
FAX. The following three are the items to be notified.
- Total Counter Transmit
When this function is effective, it notifies each counter information periodically (on the set date and
time every month).
- Service Call Transmit (E-mail only)
When this function is effective, it notifies the corresponding error code and such at a service call error.
- PM Counter Transmit
When this function is effective, it notifies that the PM timing has come when the present PM count has
reached to its setting value, or the present PM driving count has reached to its setting value.
8.2.2 Setting
Note: When using this function, it is required that sending and receiving E-mails or FAXes are
available. Confirm the details to the administrator.
8.2.2.1 Preparation
The screen to set this function is not displayed at the default setting.
Set this screen to be displayed with the following code (08).
08-774 Setting of notification display
0: Invalid (Default)
1: Valid
05/05