Filter
Top Products
e-STUDIO3511/4511 TROUBLESHOOTING 5 - 64 November 2003 © TOSHIBA TEC
[CC50] Horizontal registration motor abnormality
MJ-1023/1024 (when MJ-6004 is installed)
Is the horizontal registration home position sensor (PI61) working normally?
NO Replace the sensor.
YES
Is the wiring between the horizontal registration home position sensor and finisher controller
PC board correct?
NO Correct the wiring.
YES
Is the horizontal registration mechanism normal?
NO Fix the mechanism.
YES
1. Replace the horizontal registration motor (M62).
2. Replace the punch controller PC board.
3. Replace the finisher controller PC board.
[CC60] Punch motor abnormality
MJ-1023/1024 (when MJ-6004 is installed)
Are the punch home position sensor (PI63) and punch motor clock sensor (PI62) working normally?
NO Replace the sensors.
YES
Is the wiring between the sensors and finisher controller PC board correct?
NO Correct the wiring.
YES
Is the punching mechanism normal?
NO Fix the mechanism.
YES
1. Replace the punch motor (M61).
2. Replace the punch controller PC board.
3. Replace the finisher controller PC board.