Filter
Top Products
November 2003 © TOSHIBA TEC 6 - 31 e-STUDIO3511/4511 FIRMWARE UPDATING
<Updating FAX ROM>
Important:
• Before updating the FAX ROM, make sure to print out the current Function list for maintenance,
Function list (ADMIN), Phone book number information and Group number information. In case the
updating is failed and the registered information of the users is lost for some reason, re-register the
user information referring to the lists and recover it.
• Confirm the following items before turning OFF the power of the equipment. Turning OFF the power
may clear the data below.
• Confirm that the “MEMORY RX” LED is OFF and there are no memory reception data.
• Print the “Mailbox/Relay box report” and then confirm that there are no F code data.
• Press the [JOB STATUS] button to display the screen and then confirm that there are no memory
transmission data.
(1) Install the ROM to the download jig.
Make sure the direction is correct ( Page 6-3).
(2) Turn OFF the power of the equipment.
(3) Take off the connector cover.
Connector cover