Filter
Top Products
e-STUDIO3511/4511 ADJUSTMENT 3 - 32 November 2003 © TOSHIBA TEC
04/10
Notes:
• The text reproduction level is lower when the mode is switched from the default value to the Photo
oriented 1 or Photo oriented 2. (The text reproduction level in Photo oriented 2 is lower than that in
Photo oriented 1.)
• Changing the setting value from default value to the Text oriented 1 or Text oriented 2 causes image
noise in the printed photo image with few lines per inch. (Photo oriented 2 causes more image noise
than Photo oriented 1.)
3.5.16 Black reproduction switching at the Twin color copy mode
Black reproduction can be switched at the Twin color (Black/Red) copy mode.
3.5.15 Text/Photo reproduction level adjustment
Text/Photo reproduction level at the Full color mode, Auto color mode and Gray scale mode can be
adjusted.
Text/Photo reproduction level adjustment can be switched to "Photo oriented 1", "Photo oriented 2",
"Text oriented 1" or "Text oriented 2" in the following codes.
Item to be adjusted
Text/Photo
reproduction level
adjustment
Contents
0: Default
1: Photo oriented 2 (The printed image reproduction
level higher than that of the Photo oriented 1)
2: Photo oriented 1 (The printed image reproduction
level higher than that of the Default)
3: Equivalent to the Default
4: Text oriented 1 (The text reproduction level higher
than that of the Default)
5: Text oriented 2 (The text reproduction level higher
than that of the Text oriented 1)
Text/Photo
1725
Mode
<Adjustment Mode (05)>
Item to be adjusted
Black reproduction
switching
Contents
0: Default
1: Black reproduction oriented
Twin color copy mode
(Black/Red)
1761
Mode
<Adjustment Mode (05)>
Note:
The boundary between Red and Black may not be smooth when the setting value is "1".