Filter
Top Products
e-STUDIO3511/4511 ADJUSTMENT 3 - 42 November 2003 © TOSHIBA TEC
<Procedure>
Procedure is same as that of "3.7.2 Density adjustment (Black Mode)".
3.7.8 Setting range correction (Adjustment of background peak)
The levels of the background peak for the range correction at the Black Mode can be set at the following
codes.
<Procedure>
Procedure is same as that of "3.7.2 Density adjustment (Black Mode)".
3.7.7 Setting range correction
The values of the background peak / text peak in the range correction at the Black Mode can be switched
to "varied" or "fixed" in the following codes.
If they are fixed, the range correction is performed with standard values.
The values of the background peak affects the reproduction of the background density and the values
of the text peak affects that of the text density.
Text/Photo
825
830
Remarks
The following are the default values set
for each original mode.
Photo/Text: 12, Text: 12, Photo: 12,
Gray Scale: 12
Each digit stands for:
Ones place: Automatic density mode
Tens place: Manual density mode
The setting conditions possible are as
follows:
Background peak Text peak
1: fixed fixed
2: varied fixed
3: fixed varied
4: varied varied
Tex t
826
831
Photo
827
832
Gray Scale
828
833
Item to be adjusted
Range correction for
original manually set
on the original glass
Range correction for
original set on the
RADF
Black
Original mode
Text/Photo
835
Remarks
When the value increases, the back-
ground (low density section) of the image
is not output.
Acceptable vales: 0 to 255
(Default: Text/Photo: 56, Text: 64,
Photo: 48, Gray Scale: 48)
Tex t
836
Photo
837
Gray Scale
838
Item to be adjusted
Background peak for
range correction
Black
Original mode
<Adjustment Mode (05)>
<Adjustment Mode (05)>