Filter
Top Products
November 2003 © TOSHIBA TEC 2 - 115 e-STUDIO3511/4511
ERROR CODE AND SELF-DIAGNOSTIC MODE
0: Invalid 1: Valid
When the duplex printing is short
paid with a coin controller, reverse
side of the original is not printed and
is considered as a defect (printing job
may be cleared). To solve this
problem, the selection of printing
method is enabled with this setting.
0: Invalid (Both sides printed)
1: Valid (Only one side printed)
Rebuilds all databases.
Rebuilds all databases related to the
Address Book.
Rebuilds all databases related to the
logs.
0: Not subjected for APS judgment
1: Subjected for APS judgment
2: Normal formatting
0: Not formatted 1: Not used
2: Normal format
Performs the calibration of the pressing
position on the touch panel (LCD
screen). The calibration is performed
by pressing 2 reference positions after
this code is started up.
Returns the value to the factory
shipping default value.
Checks the bad sector.
0: Not installed
1: Installed
Sets the paper type priority during
copying.
1: Normal paper 2: Thick paper 1
Start up this code and have the user
enter the key code.
Once the key code has been set, this
code cannot be set again on security
grounds.
This setting is effective only when the
scrambler board is installed.
0: Japan 1: Asia
2: Australia 3: Hong Kong
4: U.S.A./Canada 5: Germany
6: U.K. 7: Italy
8: Belgium 9: Netherlands
10: Finland 11: Spain
12: Austria 13: Switzerland
14: Sweden 15: Denmark
16: Norway 17: Portugal
18: France 19: Greece
20: Poland 21: Hungary
22: Czech 23: Turkey
24: South Africa 25: Taiwan
1
1
3
3
3
1
7
7
1
3
3
2
1
5
3
1
ALL
ALL
ALL
ALL
ALL
FAX
ALL
ALL
ALL
ALL
ALL
ALL
PPC
ALL
ALL
FAX
SYS
SYS
SYS
SYS
SYS
SYS
SYS
SYS
SYS
SYS
SYS
-
SYS
-
-
SYS
0
<0-1>
1
<0-1>
-
-
-
0
<0-1>
-
<2>
-
<0-2>
-
-
-
0
<0-1>
1
<1-2>
-
-
EUR: 5
UC: 4
JPN: 0
Other: 1
<0-25>
682
683
684
685
686
689
690
691
692
693
694
696
697
698
699
701
User
interface
General
General
General
General
FAX
General
General
Mainte-
nance
General
General
Scrambler
board
Paper
feeding
Scrambler
board
Scrambler
board
FAX
Offsetting between jobs
Duplex printing setting when
coin controller is used
Rebuilding all databases
Rebuilding all databases
related to Address Book
Rebuilding all databases
related to log
Adaptation of paper source
priority selection
HDD formatting
HDD type display
Performing panel calibration
Initialization of NIC informa-
tion
Performing HDD testing
Installation of scrambler
board (Option)
Paper type priority
Entering the key code for
scrambler board
Erasing all data in HDD
Destination setting for FAX
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Acceptable
value>
RAM Contents
Proce-
dure
05/05