Filter
Top Products
27
Control circuit specifications
2
WIRING
2.3.7 Communication operation
2.3.8 USB connector
A personal computer and an inverter can be connected with a USB (Ver1. 1) cable.
You can perform parameter setting and monitoring with the FR Configurator.
•USB communication specifications
Using the PU connector or RS-485 terminal, you can
perform communication operation from a personal
computer etc. When the PU connector is connected
with a personal, FA or other computer by a
communication cable, a user program can run and
monitor the inverter or read and write to parameters.
For the Mitsubishi inverter protocol (computer link
operation), communication can be performed with the
PU connector and RS-485 terminal.
For the Modbus-RTU protocol, communication can
be performed with the RS-485 terminal.
For further details, refer to Chapter 4 of the
Instruction Manual (Applied).
Interface
Conforms to USB1.1
Transmission speed
12Mbps
Wiring length Maximum 5m
Connector
USB B connector (B receptacle)
Power supply
Self-power supply
Programmable controller
Multidrop link
(32 inverters maximum
are connectable)
Inverter Inverter Inverter
USB cable
USB connector
Place a flat-blade screwdriver,
etc. in a slot and push up the
cover to open.
Removal of cover