Filter
Top Products
OUTLINE
2
(2) Preparation of instruments and parts required for operation
Instruments and parts to be prepared depend on how the inverter is operated. Prepare
equipment and parts as necessary. (Refer to page 49.)
(3) Installation
To operate the inverter with high performance for a long time, install the inverter in a
proper place, in the correct direction, with proper clearances. (Refer to page 9.)
(4) Wiring
Connect the power supply, motor and operation signals (control signals) to the terminal
block. Note that incorrect connection may damage the inverter and peripheral devices.
(See page 11.)
(5) Ground
To prevent an electric shock, always ground the motor and inverter.
The ground wiring from the power line of the inverter as an induction inverter reduction
technique is recommended to be run by returning it to the ground terminal of the
inverter. (Refer to page 40 for examples of noise countermeasures.)
1