Filter
Top Products
PARAMETERS
60
4.1.2 List of parameters classified by purpose of use
Set the parameters according to the operating conditions. The following list indicates
purpose of use and corresponding parameters.
Parameter Numbers
Purpose of Use
Parameter numbers which must be set
Operation mode selection Pr. 79
Acceleration/deceleration
time/pattern adjustment
Pr. 7, Pr. 8, Pr. 20, Pr. 21, Pr. 29
Selection of output characteristics
optimum for load characteristics
Pr. 3, Pr. 14, Pr. 19
Output frequency restriction (limit) Pr. 1, Pr. 2, Pr. 18
Operation over 60Hz Pr. 1, Pr. 18
Motor output torque adjustment Pr. 0, Pr. 80
Brake operation adjustment Pr. 10, Pr. 11, Pr. 12
Multi-speed operation
Pr. 1, Pr. 2, Pr. 4, Pr. 5, Pr. 6, Pr. 24, Pr. 25,
Pr. 26, Pr. 27, Pr. 232, Pr. 233, Pr. 234,
Pr. 235, Pr. 236, Pr. 237, Pr. 238, Pr. 239
Frequency jump operation Pr. 31, Pr. 32, Pr. 33, Pr. 34, Pr. 35, Pr. 36
Automatic restart operation after
instantaneous power failure
Pr. 57, Pr. 58
Optimum acceleration/deceleration
within continuous rated range
Pr. 60
Slip compensation setting Pr. 245 to Pr. 247
Output stop method selection Pr. 250
Related to operation
Setting of output characteristics
matching the motor
Pr. 3, Pr. 19, Pr. 71
General-purpose magnetic flux vector
control operation
Pr. 80
Electromagnetic brake operation
timing
Pr. 42, Pr. 190 to Pr. 192
Offline auto tuning setting Pr. 82 to Pr. 84, Pr. 90, Pr. 96
Sub-motor operation
Pr. 0, Pr. 3, Pr. 7, Pr. 8, Pr. 9, Pr. 44, Pr. 45,
Pr. 46, Pr. 47, Pr. 48
Regenerative function selection Pr. 30, Pr. 70
Operation in communication with
personal computer
Pr. 117 to Pr. 124
Related to application
operation
Noise reduction Pr. 72, Pr. 240
4