Filter
Top Products
173
8. Class 0x66 - E500 Extended Object 1
(1) Class 0x66 Attributes - Instance 0
Note: Not applicable to the FR-E500KND.
(2) Class 0x66 Services
Note: Not applicable to the FR-E500KND.
(3) Class 0x66 Instance Attributes Instance 1
Parameters (Pr. 0 = No.10)
No. Access Attribute Default Setting
10 Get/Set Pr. 0 Torque Boost (Note 2)
11 Get/Set Pr. 1 Maximum Frequency (Note 2)
12 Get/Set Pr. 2 Minimum Frequency 0.00Hz
13 Get/Set Pr. 3 Base Frequency 60.00Hz
14 Get/Set Pr. 4 Multi Speed (high speed) 60.00Hz
15 Get/Set Pr. 5 Multi Speed (middle speed) 30.00Hz
16 Get/Set Pr. 6 Multi Speed (low speed) 10.00Hz
17 Get/Set Pr. 7 Acceleration Time (Note 2)
18 Get/Set Pr. 8 Deceleration Time (Note 2)
19 Get/Set Pr. 9 Electronic Thermal O/L Relay (Note 2)
20 Get/Set Pr. 10 DC Injection Brake Operation Frequency 3.00Hz
21 Get/Set Pr. 11 DC Injection Brake Operation Time 0.5s
22 Get/Set Pr. 12 DC Injection Brake Voltage 6.0% (Note 2)
23 Get/Set Pr. 13 Starting Frequency 0.50Hz
24 Get/Set Pr. 14 Applied Load Selection 0
28 Get/Set Pr. 18 High Speed Maximum Frequency Limit (Note 2)
29 Get/Set Pr. 19 Base Frequency Voltage (Note 3)
30 Get/Set Pr. 20 Acceleration/Deceleration Reference Frequency 60.00Hz
31 Get/Set Pr. 21 Acceleration/Deceleration Time Increments (Note 4) 0
32 Get/Set Pr. 22 Stall Prevention Operation Level 150.0%
33 Get/Set
Pr. 23 Stall Prevention Operation Level at Double
Speed
(Note 3)
34 Get/Set Pr. 24 Multi-Speed Setting (Speed 4) (Note 3)
35 Get/Set Pr. 25 Multi-Speed Setting (Speed 5) (Note 3)
36 Get/Set Pr. 26 Multi-Speed Setting (Speed 6) (Note 3)
37 Get/Set Pr. 27 Multi-Speed Setting (Speed 7) (Note 3)