Filter
Top Products
INSTALLATION AND WIRING
10
6) Avoid places where the inverter is exposed to oil mist, flammable gases, fluff, dust,
dirt etc.
Install the inverter in a clean place or inside a "totally enclosed" panel which does
not accept any suspended matter.
7) Note the cooling method when the inverter is installed in an enclosure.
When two or more inverters are installed or a ventilation fan is mounted in an
enclosure, the inverters and ventilation fan must be installed in proper positions with
extreme care taken to keep the ambient temperatures of the inverters with the
permissible values. If they are installed in improper positions, the ambient
temperatures of the inverters will rise and ventilation effect will be reduced.
8) Install the inverter securely in the vertical direction with screws or bolts.
3) Note on ambient
temperatures
Measurement
position
Measurement
p
osition
5
cm
5cm
5
cm
FR-E500
4) Clearances around the inverter
FR-E500
10cm
or more
10cm
or more
Leave sufficient
clearances above
and under the
inverter to ensure
adequate ventilation.
Cooling fan
built in the
inverter
1cm or
more*
1cm or
more*
Cooling air
*5cm or more for 5.5K and 7.5K
These clearances are also necessary for changing
the cooling fan.
7) For installation in an enclosure
Inverter
V
entilation
f
an
(Correct example) (Incorrect example)
Position of Ventilation Fan
Inverter
Built-in cooling fan
(Correct example)
Inverter
Inverter
When more than one inverter is contained
(Incorrect example)
Inverter
Inverter
8) Vertical mounting
2