xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
96
debug error_log
The “error_log” here refers to the software error log stored in NVRAM. For more information
on this command, please refer to the UIS-Debug topic
Parameters
dump - Displays debug messages occurring in the debug log.
clear - Clears the debug log.
upload_toTFTP - Uploads the debug log to the TFTP server that is specified by its IP
address.
<ipaddr> - IP version 4 address
<path_filename 64> - Uploads the debug log to the TFTP server and names it to the string
<path_filename 64>.
Restrictions Only Administrator level users can issue this command.
Example usage:
To dump the error log:
DGS-3627:admin# debug error_log dump
Command: debug error_log dump
**************************************************************************
# debug log: 1
# level: fatal
# clock: 10000ms
# time : 2010/03/11 13:00:00
====================== SOFTWARE FATAL ERROR =======================
Invalid mutex handle : 806D6480
Current TASK : bcmARL.0
------------------------- TASK STACKTRACE ------------------------
->802ACE98
->8018C814
->8028FF44
->8028352C
->801D703C
->8013B8A4
->802AE754
->802A5E0C
->802A5D6C
--------------------------------------------------------------------------
TASK NAME StackTop CurStkSP StackSize SchCnt PRIO(I) STATUS
8069E7D0 FWD-ETH 823E9798 823E95C4 1K/ 32K 2 160/160 Q:IP_PKT
806A3E70 SysLogTask 80BD040C 80BD0298 1K/ 16K 3 180/180
E:SysLogEvent
debug buffer
Purpose This command is used to show the debug buffer’s state, dump clear, or upload the debug
buffer to the TFTP server
Syntax
debug buffer [utilization | dump | clear | upload_toTFTP <ipaddr> <path_filename 64>]
Description This command is used to show the debug buffer’s state or dump, clear, or upload the debug
