xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
690
DGS-3627:admin# config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Success.
show sntp
Purpose Used to display the SNTP information.
Syntax
show sntp
Description This command will display SNTP settings information including the source IP address, time
and poll interval.
Parameters None.
Restrictions None.
Example usage:
To display SNTP configuration information:
DGS-3627:admin# show sntp
Command: show sntp
Current Time Source : System Clock
SNTP : Disabled
SNTP Primary Server : 10.1.1.1
SNTP Secondary Server : 10.1.1.2
SNTP Poll Interval : 720 sec
enable sntp
Purpose To enable SNTP server support.
Syntax
enable sntp
Description
This will enable SNTP support. SNTP service must be separately configured (see config
sntp). Enabling and configuring SNTP support will override any manually configured system
time settings.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command. SNTP settings must
be configured for SNTP to function (config sntp).
Example usage:
To enable the SNTP function:
