xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
308
DGS-3627:admin# show qinq ports 1:1-1:4
Command: show qinq ports 1:1-1:4
Port Role Missdrop TPID Use Inner Priority
----- ------ -------- ----------- ------------------
1:1 Normal Disabled 0x8100 Disabled
1:2 Normal Disabled 0x8100 Disabled
1:3 Normal Disabled 0x8100 Disabled
1:4 Normal Disabled 0x8100 Disabled
delete vlan_translation ports
Purpose Used to delete existed VLAN translation rules.
Syntax
delete vlan_translation ports [ <portlist> | all ] { cvid <vidlist> }
Description The delete vlan_translation command is used to delete translation relationship between C-
VLAN and S-VLAN.
Parameters
ports - The translation rule for the specified ports.
cvid - The rules for the specified CVIDs. If CVID is not specified, all rules configured for the
port will be deleted.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To delete VLAN translation rule on ports 1-4:
DGS-3627:admin# delete vlan_translation ports 1-4
Command: delete vlan_translation ports 1-4
Success.
show vlan_translation
Purpose Used to show existed C-VLAN based VLAN translation rules.
Syntax
show vlan_translation {[ports <portlist>}
Description Used to show existed C-VLAN based VLAN translation rules.
Parameters
ports - The C-VLAN based VLAN translation rule of the ports.
Restrictions None.
Example usage:
To show C-VLAN based VLAN translation rules in the system:
