A SERVICE OF

logo

xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
722
102
UTILIZATION COMMANDS
The Utilization commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
show utilization [cpu | ports | dram { unit <unit_id>}| flash {unit <unit_id>}]
Each command is listed, in detail, in the following sections.
show utilization
Purpose Used to display real-time port utilization statistics.
Syntax
show utilization [cpu | ports | dram { unit <unit_id>}| flash {unit <unit_id>}]
Description The show utilization command displays real-time CPU, ports, DRAM or flash utilization
statistics.
Parameters
ports - Specifies a range of ports to be displayed. (UnitID:port number).
dram - To show dram memory utilization.
flash - To show flash memory utilization.
unit - Specifies the unit to be displayed.
Restrictions None.
Example usage:
To display the ports utilization: