A SERVICE OF

logo

xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
404
show multicast_range
Purpose Used to display a range of multicast IP addresses that are specified under a given name.
Syntax
show multicast_range {<range_name 32>}
Description
This command will display a multicast range that was created with the create
multicast_range command.
Parameters
<range_name 32> Enter a name of up to 32 alphanumeric characters that will be used to
identify this multicast range to be displayed.
Entering this command without the specified range_name will display all multicast ranges
created on the Switch.
Restrictions None.
Example usage:
To display the multicast range “accounting”:
DGS-3627:admin# show multicast_range accounting
Command:show multicast_range accounting
No. Name From To
----- -------------- ---------------- -----------------
1 accounting 224.19.62.34 224.19.62.200
Total Entries: 1
DGS-3627:admin#