xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
395
DGS-3627:admin# show jwac auth_state ports 1-2
Command: show jwac auth_state ports 1-2
Pri - Priority. State - A:Authenticated, B:Blocked, -:Authenticating
Time - Aging Time/Idle Time for authenticated entries.
Port MAC Address State VID Pri Time IP User Name
----- ----------------- -- ---- -- -------- ---------------- ----------------
1 00-00-00-00-00-01 A 4004 3 -/40 192.168.101.239 juser_tom
1 00-00-00-00-00-02 A 1234 - -/50 172.18.61.242 name_of_15chars
1 00-00-00-00-00-03 B - - 60 172.18.61.242 Jack
1 00-00-00-00-00-04 - - - 10 - -
2 00-00-00-00-00-10(P) A 1234 2 1440/20 10.10.10.90 Logan
3 00-00-00-00-00-20(P) - - - 20 10.10.10.131 -
3 00-00-00-00-00-21(P) B - - 200 - Victor
Total Authenticating Hosts : 2
Total Authenticated Hosts : 3
Total Blocked Hosts : 2
show jwac ports
Purpose Used to display port configuration of JWAC.
Syntax
show jwac ports {<portlist>}
Description The show jwac port command allows you to display port configuration of JWAC.
Parameters
all - To show all ports’ configuration of JWAC
<portlist> - To specify a port range to show the configuration of JWAC
If no port is specified, the configuration for all ports will be displayed.
Restrictions None.
Example usage:
To display port configuration:
DGS-3627:admin# show jwac ports 1-4
Command: show jwac ports 1-4
Port State Aging Time Idle Time Block Time Auth Mode Max
(min) (min) (sec) Hosts
----- -------- ------------ ------------ ----------- ----------- -------
1 Enabled Infinite 20 10 Port-Based 10
2 Disabled 60 10 2 Port-Based 10
3 Enabled 1440 Infinite 2 Host-Based 50
4 Enabled 600 30 5 Host-Based 50
config jwac authentication_page element
Purpose Used to customize the authenticate page.
Syntax
config jwac authentication_page element [ japanese | english ] [default | page_title
<desc 128> | login_window_title < desc 32> | user_name_title < desc 16> |
password_title < desc 16> | logout_window_title < desc 32> | notification_line <line
value 1-5> <desc 128>]
Description This command let administrator customize the JWAC authenticate page.
