xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
21
DGS-3627:admin# config greeting_message
Command: config greeting_message
Greeting Messages Editor
===============================================================================
DGS-3627 Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 2.80.B31
Copyright(C) 2010 D-Link Corporation. All rights reserved.
================================================================================
<Function Key> <Control Key>
Ctrl+C Quit without save left/right/
Ctrl+W Save and quit up/down Move cursor
Ctrl+D Delete line
Ctrl+X Erase all setting
Ctrl+L Reload original setting
show greeting_message
Purpose Used to view the currently configured greeting message configured on the Switch.
Syntax
show greeting_message
Description This command is used to view the currently configured greeting message on the
Switch.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To view the currently configured greeting message:
DGS-3627:admin# show greeting_message
Command: show greeting_message
================================================================================
DGS-3627 Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 2.80.B31
Copyright(C) 2010 D-Link Corporation. All rights reserved.
================================================================================
