xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
29
show bpdu_tunnel
Purpose Used to show BPDU Tunneling global state, tunnel destination MAC address and ports state.
Syntax
show bpdu_tunnel
Description This command is used to show BPDU Tunneling global state, tunnel destination MAC
address and ports state.
Parameters None.
Restrictions None,
Example usage:
To show BPDU tunneling state of all ports:
DGS-3627:admin# show bpdu_tunnel
Command: show bpdu_tunnel
BPDU Tunnel : Enabled
STP Tunnel Multicast Address : 01-05-5d-00-00-00
STP Tunnel Ports : 1,2
GVRP Tunnel Multicast Adrress : 01-05-5d-00-00-21
GVRP Tunnel Port : 5,6
Uplink Ports : 3,4
enable bpdu_tunnel
Purpose Used to enable the BPDU Tunneling function.
Syntax
enable bpdu_tunnel
Description Enable the BPDU Tunneling function.
By default, BPDU Tunneling is disable.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable the BPDU Tunneling function:
DGS-3627:admin# enable bpdu_tunnel
Command: enable bpdu_tunnel
Success.
disable bpdu_tunnel
Purpose Used to disable the BPDU Tunneling function.
Syntax
disable bpdu_tunnel
Description Disable the BPDU Tunneling function.
Parameters None.
