xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
265
DGS-3627:admin# disable dvmrp
Command: disable dvmrp
Success.
show dvmrp routing_table
Purpose Used to display the current DVMRP routing table.
Syntax
show dvmrp routing table {ipaddress <network_address>}
Description The command is used to display the current DVMRP routing table.
Parameters
ipaddress <network_address> − The IP address and netmask of the destination. The
address and mask information can be specified using the traditional format (for
example, 10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8).
Restrictions None.
Example usage:
To display DVMRP routing table:
DGS-3627:admin# show dvmrp routing_table
Command: show dvmrp routing_table
DVMRP Routing Table
Source Address/Netmask Upstream Neighbor Metric Learned Interface Expire
--------------- --------------- ---- ------- ------------ ------
10.0.0.0/8 10.90.90.90 1 Local System -
20.0.0.0/8 20.1.1.1 2 Dynamic ip2 117
30.0.0.0/8 30.1.1.1 2 Dynamic ip3 106
Total Entries: 3
show dvmrp neighbor
Purpose Used to display the DVMRP neighbor table.
Syntax
show dvmrp neighbor {ipif <ipif_name 12> | ipaddress <network_address>}
Description This command will display the current DVMRP neighbor table.
Parameters
<ipif_name 12> − The name of the IP interface for which to display the DVMRP
neighbor table.
ipaddress <network_address> − The IP address and netmask of the destination.
The address and mask information can be specified using the traditional format
(for example, 10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8).
Restrictions None.
Example usage:
To display DVMRP neighbor table:
