xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
646
DGS-3627:admin# show stack_information
Command: show stack_information
Topology :Duplex_Chain
My Box ID :3
Master ID :3
Box Count :1
Force Master Role: Enable
Box User Prio- Prom Runtime H/W
ID Set Type Exist rity MAC Version Version Version
--- ---- ---------- ----- ---- ------------------ ---------- --------- --------
1 - DGS-3627 No
2 - NOT_EXIST No
3 User DGS-3627 Exist 0 00-00-11-33-66-33 1.00.B007 2.00.B033 A1
4 - NOT_EXIST No
5 - NOT_EXIST No
6 - NOT_EXIST No
7 - NOT_EXIST No
8 - NOT_EXIST No
show stack_device
Purpose Used to display information about the devices in the stack.
Syntax
show stack_device
Description The show stack_device command displays stack device information.
Parameters None.
Restrictions None.
Example usage:
To display the stack device information:
DGS-3627:admin# show stack_device
Command: show stack_device
Box ID Box Type H/W Version Serial Number
------- --------------- ------------ ----------------
1 DGS-3627 0A1 1234567890123
3 DGS-3627 0A1 2345678901234
config stacking force_master_role
Purpose This command is used to configure the stacking force master role state.
Syntax
config stacking force_master_role state [enable | disable]
Description This command is used to ensure the master role is unchanged when new device add to
