xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
473
Command Parameters
show stp
show stp instance <value 0-15>
show stp ports
{<portlist>}
show stp mst_config_id
create stp instance_id <value 1-15>
delete stp instance_id <value 1-15>
config stp instance_id <value 1-15> [add_vlan | remove_vlan] <vidlist>
config stp mst_config_id {name <string> | revision_level <int 0-65535>}
enable stp
disable stp
config stp version [mstp | rstp | stp]
config stp priority <value 0-61440> instance_id <value 0-15>
config stp {maxage <value 6-40> | maxhops <value 1-40> | hellotime <value 1-10> |
forwarddelay <value 4-30> | txholdcount <value 1-10> | fbpdu
[enable(3)|disable(2)] | lbd [enable(1)|disable(0)] | lbd_recover_timer [<value 0> |
<value 60-1000000>] | nni_bpdu_addr [dot1d | dot1ad]}(1)
config stp ports
<portlist> {externalCost [auto | <value 1
-200000000>] | hellotime <value 1
-10> | migrate [yes | no] | edge [true | false | auto] | p2p [true | false | auto] | state
[enable | disable] | restricted_role [true |f alse] | restricted_tcn [true | false] | lbd
[enable | disable] | fbpdu [enable | disable]}(1)
config stp mst_ports
<portlist> instance_id <value 0
-15> {internalCost [ a
uto | <value 1-200000000>] | priority <value 0-240>}
Each command is listed, in detail, in the following sections.
show stp
Purpose Used to show the bridge parameters global settings. (CIST or msti id=0)
Syntax
show stp
Description The show stp command is used to show the bridge parameters global settings.
Parameters None.
Restrictions None.
Example usage:
To show stp:
