xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
401
DGS-3627:admin# config limited multicast address 1-3 from 224.1.1.1 to 224.1.1.2 access
permit state enable
Command: config limited multicast address 1-3 from 224.1.1.1 to 224.1.1.2 access permit
state enable
Success.
delete limited multicast address
Purpose Used to delete Limited IP multicast address range.
Syntax
delete limited multicast address [all | <portlist>]
Description
The delete limited multicast address command allows the user to delete all multicast
address ranges or a selected range based on what port or ports the range has been
assigned to.
Parameters
all − Allows the user to delete all limited multicast addresses that have been configured on
the Switch.
<portlist> − Allows the user to delete only those multicast address ranges that have been
assigned to a particular port or range of ports. The beginning and end of the port list range
are separated by a dash. Non-contiguous portlist entries are separated by a comma. (ex: 1-
3,7-9)
Restrictions Only Administrator and Operator-level users can issue this command. This command is used
as a backwards compatible command for legacy devices.
Example usage:
To delete the limited multicast address on ports 1 to 3:
DGS-3627:admin# delete limited multicast address 1-3
Command: delete limited multicast address 1-3
Success.
