A SERVICE OF

logo

xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
257
show dnsr
Purpose Used to display the current DNS relay status.
Syntax
show dnsr {static}
Description This command is used to display the current DNS relay status.
Parameters
static Allows the display of only the static entries into the DNS relay table. If this parameter is
omitted, the entire DNS relay table will be displayed.
Restrictions None.
Example usage:
To display DNS relay status:
DGS-3627:admin# show dnsr
Command: show dnsr
DNSR Status : Disabled
Primary Name Server : 0.0.0.0
Secondary Name Server : 0.0.0.0
DNSR Cache Status : Disabled
DNSR Static Table Status : Disabled
DNS Relay Static Table
Domain Name IP Address
-------------------------------- ---------------
www.123.com.tw 10.12.12.123
Total Entries: 1
DGS-3627:admin#