xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
207
create dhcp pool
Purpose Used to create a DHCP pool.
Syntax
create dhcp pool <pool_name 12>
Description This command will create a DCHP pool for the DHCP server. Once created, this pool may be
modified for accepting DHCP clients into this pool.
Parameters
<pool_name 12> − Enter an name of up to 12 alphanumeric characters to identify the pool to
be created with this command.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To create the DHCP pool Floor2:
DGS-3627:admin# create dhcp pool Floor2
Command:create dhcp pool Floor2
Success.
DGS-3627:admin#
delete dhcp pool
Purpose Used to delete a DHCP pool.
Syntax
delete dhcp pool [<pool_name 12> | all]
Description
This command will delete a DHCP pool that was created with the create dhcp pool
command.
Parameters
<pool_name 12> − Enter an name of up to 12 alphanumeric characters to identify the pool to
be deleted with this command.
all – Enter this command to delete all created DHCP pool.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To delete the DHCP pool Floor2:
DGS-3627:admin# delete dhcp pool Floor2
Command:delete dhcp pool Floor2
Success.
DGS-3627:admin#
