xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
667
show syslog source_ipif
Purpose Show syslog source IP interface.
Syntax
show syslog source_ipif
Description This command is used to display the syslog source IP interface.
Parameters None.
Restrictions None.
Example usage:
Show syslog source IP interface:
DGS-3627:admin# show syslog source_ipif
Command: show syslog source_ipif
Syslog Source IP Interface Configuration:
IP Interface : ipif3
IPv4 Address : 14.0.0.3
config trap source_ipif
Purpose Configure trap source IP interface.
Syntax
config trap source_ipif [<ipif_name> {<ipaddr> | <ipv6addr>} | none]
Description This command is used to configure trap source IP interface.
Parameters
ipif_name - IP interface name. If only specify this parameter, the least IPv4 address and the
smallest IPv6 address of ipif_name will be used as source IP addresses.
none - For clearing the configured source IP interface.
ipaddr - IPv4 address.
ipv6addr - IPv6 address.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
Configure trap source IP interface:
DGS-3627:admin# config trap source_ipif inter4
Command: config trap source_ipif inter4
Success
To clear the configured trap source IP interface:
